10 of the Hottest Hunting Suppressors on the Market in 2026
HOME›NEWS›INDUSTRY
INDUSTRY

Airlock's Zero Gravity Hits 5.75 Ounces — Hunting Suppressors Keep Shrinking

Outdoor Life Guns highlights 2026 hunting cans from Airlock, Nomad, Tenet, and Unknown Munitions. Five weigh under 10 ounces, with titanium and 3D-printed bodies. Lighter cans mean more hunters can carry them all day.

Outdoor Life Guns|November 18, 2026|7h ago|4 min read|ORIGINAL SOURCE ↗

Five 2026 Hunting Suppressors Now Weigh Under 10 Ounces

Outdoor Life Guns published its 2026 hunting suppressor roundup on November 18, 2026, and the cans it covers share one trait: they are light. The Airlock Zero Gravity Nano tips the scale at 3.7 ounces. The Tenet Buckskin 30 weighs 8.5 ounces, and the TiTrex 300 Ti holds at 9.5 ounces after months of shooting. Nearly every model on the list uses titanium, and most rely on 3D printing to eliminate the welds that have plagued earlier designs. The article names at least seven cans, though the roundup promises ten. Each one targets a specific hunting rifle, from bolt-action .22 centerfires to magnum .30-caliber setups.

Key Details

The roundup breaks its picks into specific use cases. Here are the models with the hard numbers the source provides:

  • Airlock Zero Gravity: 5 inches long, 5.75 ounces, 3D-printed titanium, direct thread only. Priced at $900, which the author calls a strong value against top-tier hunting cans that run $1,000 or more.
  • Airlock Zero Gravity Nano: 3.7 ounces, built for bolt-action centerfire .22 cartridges including the 22 ARC, 22 Creed, and .22-250 Remington.
  • Nomad Ti XC: 3D-printed, threaded front and rear, HUB rear mount compatible, under 10 ounces. Rated for .30-caliber and smaller. Deep tool notches ease HUB mount removal.
  • Nomad TiOTB: Reflex design with a chamber that extends over the barrel for a shorter overall length. Works only with a thread-over-brake mount.
  • TiTrex 300 Ti: Titanium body, HUB rear mounts, interchangeable front caps, and a full-auto rating. The serialized stainless band at the rear moves to a new core if the original wears out.
  • Tenet Buckskin 30: 3D-printed titanium with a non-adjustable built-in front brake. Tested on a 20-inch 300 PRC, several 6.5 Creedmoors, and a 16-inch 7mm Backcountry.
  • Tenet Limited 30: Removable front brake with two ports. The gen 2 brake adds small steps to reduce the gas blast that bothered early users.
  • Unknown Munitions can: Fully 3D-printed titanium, about 11 ounces, reflex design.

Background

Suppressors are regulated under the National Firearms Act, which means every can requires federal registration through an approved ATF Form 4 before transfer. For decades, the $200 tax stamp and approval waits that stretched past a year pushed many hunters toward modular systems. A single modular core could be paired with multiple endcaps and mounts, which justified the cost and the wait. The thinking was simple: buy once, adapt many times. Silencerco's Scythe Ti showed the weak point of that generation. Its welds failed under use, which pushed the market toward additive manufacturing. Printing lets makers skip welds on thin titanium and iterate designs faster. Congress also changed the math. The 2025 budget law reduced the $200 NFA tax on suppressors to zero for transfers starting January 1, 2026. That cut removed a major cost barrier and fueled the wave of new models now hitting shelves.

Why It Matters for Gun Owners

First-time buyers face the most decisions. The lighter cans make sense for hunters who carry a rifle through steep country all day, where every ounce on the muzzle adds up. Compatibility matters more than weight, though. A HUB-mounted can will not fit a direct-thread-only rifle setup, and a thread-over-brake can like the Nomad TiOTB needs that specific mount. Check the thread pitch and the mount system before ordering. Recoil reduction also depends on the front brake, so a can with a removable brake gives you tuning options that a fixed design does not. Your state matters too. Several states restrict suppressor use while hunting, and some ban it outright, so read your state game regulations before you pack the can. Finally, the NFA paperwork still applies to every purchase. Budget for the approval process, and confirm how your trust or individual ownership will handle the registration.

DownRange Analysis

The Bruen framework has changed how courts review carry laws, but it does not map cleanly onto NFA suppressor regulation. Challenges to the registration system are still working through the courts, and Congress has not repealed the registration requirement. Until that changes, the zero-dollar tax is the main story, and it reshapes the market. Expect more brands at the $900 price point and more pressure on $1,000-plus cans. A full-auto rating, like the one on the TiTrex 300 Ti, describes construction tolerance. It does not authorize full-auto fire, and no hunter should treat it that way. Buy from makers with a track record, handle the can before you commit, and verify the weight claims yourself. A printed can with a clean weld history beats a cheap can that fails on the third hunt. Test your mount before opening day, and confirm your state's suppressor rules before you pull the trigger.

ORIGINAL SOURCE
This editorial was written by DownRange based on the original article. Read the primary source for additional detail.
READ ORIGINAL ↗
TAGS
suppressorshunting-suppressorsairlocktenetnomad-suppressorsnfasuppressor-tax
SHARE:X / TWITTERFACEBOOK