A CZ 457 Squirrel Rifle Averages Half-Inch Groups at 50 Yards
An Outdoor Life Guns writer rebuilt a CZ 457 American into a dedicated squirrel rifle and shot it this fall. Three .22 LR loads averaged about half an inch at 50 yards across five five-shot groups each. The build swaps the factory barrel for a 16-inch Proof Research pre-fit, keeps the wood stock, and adds a Nightforce NX6 2-12x F1 scope. The writer's goal was an ultra-quiet, accurate, handy rimfire for tree squirrels. The report, published November 12, 2026, reads more like a long-term keeper project than a factory review. Its numbers still deserve a close look.
Key Details
The core specs and results from the build:
- Base rifle: CZ 457 American, stock retained
- Barrel: 16-inch Proof Research pre-fit, chosen over the Lilja pre-fit for lighter weight
- Barrel swap: Two set screws release the barrel, and the new one drops into the action
- Scope: Nightforce NX6 2-12x F1, described as light and short
- Stock work: Interior sanded to clear the new barrel, done with a palm sander, a sandpaper-wrapped dowel, or a Dremel
- Accessories: Area 419 CZ 457 scope base with a replacement bolt handle, which raises the optic line for 300-yard plinking
- Trigger: Timney CZ 457 trigger, listed as the final planned upgrade
- Suppressor: Dead Air RXD22Ti and CAT BEN 22 Ti named as alternatives; the writer prefers a .22 can for quiet, light, easy cleaning
- Ammunition tested: SK Rifle Match, Lapua Center X, and CCI Select, five five-shot groups each
- Accuracy result: All three loads averaged about 1/2 inch at 50 yards; CCI Select performed best and costs less than the other loads tested
- Field handling: The rifle carried easily slung and mounted quickly on a squirrel
The article also carries an affiliate disclosure. Outdoor Life may earn revenue from products linked on the page.
Background
The CZ 457 is a bolt-action .22 LR rifle from Czech manufacturer CZ. The American variant ships with a wood stock, which places it in the traditional hunting rimfire category rather than the chassis-based tactical segment. Pre-fit barrels, such as those from Lilja and Proof Research, exist because rimfire shooters want accuracy upgrades without gunsmith fitting work. Drop-in barrels that seat in the action with a few screws have become a common path for owners who want to change the rifle's personality over time.
Suppressors have a different history. The National Firearms Act of 1934 placed suppressors under federal registration, and the $200 transfer tax stayed in place for decades. Congress reduced that tax to zero for suppressors starting January 1, 2026, under the 2025 budget reconciliation law. Registration through the ATF Form 4 process still applies. The change cut the cost of a .22 can dramatically, which is why rimfire shooters now treat suppressors as mainstream accessories instead of specialty purchases.
Why It Matters for Gun Owners
This build matters to owners of CZ 457s and any rimfire bolt gun with a drop-in barrel option. Swapping barrels changes point of impact, so the rifle needs a fresh zero and a function check after every change. Check the set screws for proper torque and verify that the bolt locks and cycles cleanly with the new tube. Owners who run a suppressor should confirm the mount and baffle combination holds zero and does not shift under repeated cycling.
The ammunition results matter for anyone buying in bulk. The writer found that CCI Select shot best in this barrel and costs less than the premium match loads. A shooter who wants a squirrel gun does not need match-grade ammunition. Test two or three budget loads before spending on a premium box. Pay attention to the groups your barrel prefers, not what a forum says.
Hunters should check state rules before they carry a suppressed rimfire into the field. Several states limit or ban suppressor use while hunting, and some restrict specific calibers or hunting methods. Read your state wildlife code before opening season, not after.
DownRange Analysis
This build raises no Second Amendment question. It is a hobbyist project using lawful parts, and the only federal hook is the NFA on the suppressor, which the Form 4 process handles. The real value sits in the accessory logic. A drop-in barrel, a fixed-power scope that stays short, and a trigger upgrade turn a $400-class rifle into a precision squirrel tool. Every part earns its place for a single purpose. Most owners overbuild. This writer did not.
Right now, owners who want this setup should start with the barrel and the ammunition. Buy a box of CCI Select and run five-shot groups at 50 yards before touching the scope. If the rifle groups under an inch, the rest of the build makes sense. If it does not, the scope and suppressor will not fix a barrel problem. Verify your state's hunting rules before buying a can, because a federal tax of zero does not override state law.




