X-CATCH FX Steel Magazine Release Takes Glock 15-Round and S15 Mags
HOME›NEWS›INDUSTRY
INDUSTRY

One Steel Release Now Runs Glock's 15-Round and S15 Mags

XTech Tactical launched the X-CATCH FX, an all-steel extended magazine release for the Glock 43X and 48. It runs Glock's factory 15-round magazine and Shield Arms S15 magazines in the same pistol, with an MSRP of $39.95 and a lifetime warranty.

The Firearm Blog|November 13, 2026|5d ago|4 min read|ORIGINAL SOURCE ↗

XTech's $39.95 Steel Release Runs Glock 15-Rounders and S15s Together

XTech Tactical launched the X-CATCH FX on November 13, 2026, an all-steel extended magazine release built for the Glock 43X and 48. The part is designed to run both Glock's factory 15-round magazine and Shield Arms S15 magazines in the same pistol. Standard steel releases will not accept Glock's wider 15-round magazine, and forcing one in can lock it in place. Owners who moved to S15s and then picked up Glock's 15-rounders have been stuck choosing one or the other. The X-CATCH FX is XTech's answer to that problem.

Key Details

The X-CATCH FX is a machined-steel extended release sized to cover the full width range of both magazine designs. XTech says it is the only steel release engineered to handle Glock OEM 15-round and Shield Arms S15 magazines together. Key specifications and terms:

  • Product: X-CATCH FX, all-steel extended magazine release
  • Compatibility: Glock 43X and Glock 48
  • Magazines supported: Glock OEM 15-round and Shield Arms S15
  • MSRP: $39.95
  • Warranty: Lifetime
  • Installation: Uses the factory spring; reversible for left-handed shooters

XTech says machining avoids the molding warp it attributes to factory releases. The engagement face is beveled and tumbled to reduce the wear steel releases typically put on polymer magazine catches. The product page still warns that long-term use with Glock 10-round or PSA 15-round polymer magazines "may deform magazine due to polymer interface." Jeremy Deadman, Founder and Managing Member of XTech Tactical, framed the release as a way for 43X and 48 owners to run whichever magazine proves itself without modifying the pistol. Deadman also confirmed that XTech's own 43X/48 magazines are coming next.

Background

Glock's 43X and 48 are slim 9mm pistols that sit in the middle of the company's lineup, with the 48 offering a longer sight radius and a more full-size feel than the 43X. For most of the platform's life, owners relied on 10-round factory magazines. That left a gap that aftermarket makers filled, and Shield Arms built a following around its S15 magazines.

Steel magazine releases became a common upgrade for owners running steel-bodied aftermarket magazines. Steel contacts the polymer catch on the magazine's lower edge, and over time that contact can chew up the factory catch. Many owners accepted the trade-off, and aftermarket releases filled the niche. Glock's own 15-round magazines for the 43X and 48 changed the math, because their wider body does not fit releases sized for the earlier aftermarket footprint. The result was a parts conflict that forced owners to pick a magazine family or buy a different release.

Why It Matters for Gun Owners

If you own a 43X or 48 and run S15 magazines, check your current release before you load a Glock 15-rounder. Do not force a magazine that will not seat. A magazine locked into the well can turn a range session into a malfunction drill, and a stuck mag is a bad time to find out your release is the wrong size.

Owners in states with 10-round magazine limits, including California, New York, and New Jersey, cannot legally use 15-round magazines in most cases, so this release matters mainly to owners in states where those magazines are lawful. Colorado also enforces its own limits, so check local law before you buy any high-capacity magazine. The release itself is a parts question, not a legal one.

Watch the wear on your polymer magazines after switching to steel. XTech's own warning about polymer deformation with Glock 10-round and PSA 15-round magazines is worth reading in full before you assume a steel release will last forever on every magazine you own. Inspect your catch after a few hundred rounds.

DownRange Analysis

A magazine release is a part, not a firearm, and Bruen's text-and-history test applies to laws that regulate arms. A release that fits a pistol doesn't attract the same legal scrutiny as capacity limits. The real Second Amendment fight on this platform is the magazine itself, which is where states draw their lines. Courts have not yet settled whether bans on common magazines survive Bruen, and this product does nothing to change that.

The market case is simple. At $39.95 with a lifetime warranty, the X-CATCH FX undercuts the cost of buying a second release for every magazine family you own. The product will live or die on field results, not on the press release. Deadman's challenge to test XTech's own magazines against the competition is the right call, and DownRange plans to hold the release to the same standard.

What should you do now? Confirm your current release fits both magazine types before you rely on either one. Never force a magazine. If you run S15s, track catch wear. If you are buying new, wait for independent testing or XTech's own magazine launch before you commit your whole magazine rotation to one system.

ORIGINAL SOURCE
This editorial was written by DownRange based on the original article. Read the primary source for additional detail.
READ ORIGINAL ↗
TAGS
glock-43xglock-48magazine-releasextech-tacticalshield-arms-s15aftermarket-partssteel-release
SHARE:X / TWITTERFACEBOOK